EM-200-29 Spec Sheet

consulab, automotive trainer

Hybrid Planetary Gearset Trainer

 EM-200-29_053137

The EM-200-29 Hybrid Planetary Gearset Trainer is designed to help instructors teach and students to understand the somewhat complex operation of a typical hybrid vehicle drivetrain. Based on a typical Toyota Prius hybrid vehicle, the trainer provides easy visualization of driveline component operation.

REQUEST A QUOTE
Educational Advantages
  • Clearly demonstrates the operation of ICE, MG1, MG2, and Drive wheels in all vehicle modes
  • Students are required to be part of the driveline operation by turning hand cranks or holding devices which increases their engagement and involvement
  • Trainer provides a significant educational tool that clearly demonstrates the complex operation of a hybrid drivetrain using a power split device
  • Makes all major hybrid drivetrain components clearly visible which are normally not accessible in the vehicle
Operational Modes
  • Electric drive – light acceleration & low speed (stealth mode)
  • Hybrid drive – normal driving
  • Hybrid drive – high speed cruise or full throttle acceleration
  • Hybrid drive – high speed energy recirculation
  • Coasting & regenerative braking
  • Electric drive reverse
Features
  • The EM-200-29 trainer is designed to have students manually rotate, hold, or release each component using hand cranks
  • An operational diagram on the trainer gives instructions as to the status of each component during operational modes
  • Clearly demonstrates the operation of ICE, MG1, MG2, and drive wheels in all vehicle modes
  • Clear representation of driveline components including ICE, MG1, MG2, and drive wheels
  • Hand cranks and drums that are used by students to either drive or hold components to demonstrate each operational mode
  • The operational diagram identifies which component is held, driven, and/or spins freely in each mode. Students either hold or turn hand cranks to demonstrate each mode. This allows full visualization of each mode for better understanding of system operation. Each of the four components will react exactly as it does in the vehicle, including changes in the direction of rotation of MG1. Diagnostic scenarios can also be created for example by showing what would happen if MG1 fails. In some modes, two students are required to operate all components on the trainer